Products

 Home / Products /SKF SY 1.1/2 PF/AH bearing high technology
18March

SKF SY 1.1/2 PF/AH bearing high technology

Leave a Comment

Y-TECH plummer block units with grub screws, metric shafts d 2

SY 1.3/16 TF/AH. 40. 25. 38,1 82. 42,9 16,5 117,5 152 23,5 14. 12. 22,2. Y-bearing plummer block units with a cast housing and grub screws, inch shafts . SY 1.1/2 TF/AH. SY 508 U/AH YAR 208 108 2F/AH. 6 910. 4 280. 180. 4 800. 3.95. 30,7. 19. 0,8. 1,80. SYJ 1.1/2 TF. SYJ 508. YAR 208 108 2F. 6 910. 4 280. 180. 4 800.

Y-bearing plummer block units - SY 1.1/2 TF - SKF.c

d, 38.1, mm. A, 48, mm. A1, 30, mm. A5, 23.5, mm. B, 49.2, mm. H, 99, mm. H1, 49.2, mm. H2, 19, mm. J, 135.5, mm. J, max. 146, mm. J, min. 125, mm. L, 175, mm. N, 24.5, mm. N1, 14, mm. s1, 30.2, mm. Threaded hole. RG, 1/4-28 UNF. R1, 3.5, mm. Rα, 45, °. Grease fitting. DN, 6.5, mm. SWN, 7, mm. GN, 1/4-28 SAE-LT.

Y-bearings and Y-bearing units - Geers-Industr

Y-bearing unit designation system. Examples. FYTBKC 30 NTR/VE495. SYJ 30 KF. SY 1.1/2 TF. TUJ 50 TF. PFD 40. Identification of housing type. J stands for dimensions to standard JIS 1559-1995. FY(J). Flanged housing. P. Plummer block housing, pressed steel. PF. Flanged housing, pressed steel. SY(J). Plummer block

SKF SY 1.1/2 FM Pillow Block Ball Bearing, 2 Bolts, Normal-Dut

SKF SY 1.1/2 FM Pillow Block Ball Bearing, 2 Bolts, Normal-Duty, Eccentric Locking Collar, Contact Seals, Cast Iron, Inch, 1-1/2" Shaft, 1-15/16" Base To Center Height, 5-11/32" Bolt Hole Spacing Browning VPS-212 AH Pillow Block Ball Bearing, 2 Bolt, Air Handling Duty, Setscrew Lock, Contact and Flinger Seal, Cast…

SKF ConCentra roller bearing units for fast and - Rulmenti Sued

shaft and sit firmly in position. They must be protected against contam- ination during mounting. • Conditioning monitoring should be possible to avoid unplanned stop- pages and prevent premature bear- ing replacement, just to be on the safe side. SKF ConCentra roller bearing units are such mounted roller bearings which.

Y-TECH plummer block units with grub screws, metric shafts d 2

SY 1.3/16 TF/AH. 40. 25. 38,1 82. 42,9 16,5 117,5 152 23,5 14. 12. 22,2. Y-bearing plummer block units with a cast housing and grub screws, inch shafts . SY 1.1/2 TF/AH. SY 508 U/AH YAR 208 108 2F/AH. 6 910. 4 280. 180. 4 800. 3.95. 30,7. 19. 0,8. 1,80. SYJ 1.1/2 TF. SYJ 508. YAR 208 108 2F. 6 910. 4 280. 180. 4 800.

6107 EN SKF ConCentra ball bearing uni

SY 40 PF SY 1.1/2 PF/AH. 60. SY 45 PF SY 1.11/16 PF/AH. 65. SY 50 PF SY 1.15/16 PF/AH. 70. SY 55 PF SY 2.3/16 PF/AH. 77,5. SY 60 PF SY 2. /16 PF/AH. 85. –. SY 2.11/16 PF/AH. 97,5. –. SY 2.15/16 PF/AH. 102,5. Tabelle 1. Standard-Schmierfettfüllung in SKF ConCentra Kugellagereinheiten. Eigenschaften. Technische.

6107 EN SKF ConCentra ball bearing uni

SY 40 PF SY 1.1/2 PF/AH. 60. SY 45 PF SY 1.11/16 PF/AH. 65. SY 50 PF SY 1.15/16 PF/AH. 70. SY 55 PF SY 2.3/16 PF/AH. 77,5. SY 60 PF SY 2. /16 PF/AH. 85. –. SY 2.11/16 PF/AH. 97,5. –. SY 2.15/16 PF/AH. 102,5. Tabelle 1. Standard-Schmierfettfüllung in SKF ConCentra Kugellagereinheiten. Eigenschaften. Technische.

SKF SY 1.1/2 FM Pillow Block Ball Bearing, 2 Bolts, Normal-Dut

SKF SY 1.1/2 FM Pillow Block Ball Bearing, 2 Bolts, Normal-Duty, Eccentric Locking Collar, Contact Seals, Cast Iron, Inch, 1-1/2" Shaft, 1-15/16" Base To Center Height, 5-11/32" Bolt Hole Spacing Browning VPS-212 AH Pillow Block Ball Bearing, 2 Bolt, Air Handling Duty, Setscrew Lock, Contact and Flinger Seal, Cast…

SKF ConCentra ball bearings and units - SKF.c

SKF ConCentra ball bearings and units are part of SKF's extensive line of ready-to- install mounted products. These units, with true concentric location on the shaft, are particularly well suited for applications where there are relatively high speeds and moderate loads and where vibration, low noise, and minimal

Y-bearing plummer block units - SY 1.1/2 TF - SKF.c

d, 38.1, mm. A, 48, mm. A1, 30, mm. A5, 23.5, mm. B, 49.2, mm. H, 99, mm. H1, 49.2, mm. H2, 19, mm. J, 135.5, mm. J, max. 146, mm. J, min. 125, mm. L, 175, mm. N, 24.5, mm. N1, 14, mm. s1, 30.2, mm. Threaded hole. RG, 1/4-28 UNF. R1, 3.5, mm. Rα, 45, °. Grease fitting. DN, 6.5, mm. SWN, 7, mm. GN, 1/4-28 SAE-LT.

About elos

We through the high-end technology, to create a high quality, precision bearings


Read more